![background image](http://html1.mh-extra.com/html/vaf-instruments/247/247_technical-manual_3147088005.webp)
4
2.1.2 Reset
During printing operation, the printwheels are reset to zero through rotation of the reset gear-train and
reset shaft, figure 3. During the “Print In” cycle, one complete clockwise revolution of the reset drive
gear turns the reset shaft gear and reset shaft to zero the print wheels.
2.1.3 Printing
In printing operation, a ticket is inserted into the slot of the ticket tray until it bottoms on the internal
stop.
a. As the printing crank is turned, the reset drive gear, figure 3, makes one complete clockwise
revolution until a positive stop is reached. As the ticket tray moves into position, the seal pin
pierces the ticket, holding it in place. This initial printing is made with wheels at zero.
b. At the completion of delivery, the crank is turned in a clockwise direction one complete turn until
the stop is again reached. During this cycle the second printing is made recording the amount of
delivery. At the end of the print cycle the ticket tray returns to original position and the seal pin
releases the ticket.
Содержание 247
Страница 9: ...8 Fig 4 Lubrication points Fig 5 Lubrication points...
Страница 18: ...17...