5
17/05/2016
RD 300-400S/C
Radar
B
It is often beneficial to calibrate the radar for an exact report. See chapter 7.4 in the instruction manual.
The radar angle must be adjusted. The angle must be 35° ± 1° in relation to the soil surface. The angle of
the radar is optimal when the surface (A) is parallel to the soil surface. Loosen the screws and adjust the
bracket along the oblong hole (B).
LowLift
When sowing, you should use low-lift in order to not lift the machine more than necessary, and so that
the following harrow also works on headlands.
See the respective overviews for iPad and ControlStation on how to connect and disconnect the function.
The LowLift switch triggers the start and stop of seed drilling!
The LowLift height should neither be too low nor too high.
The front tool must always be above ground height for low-lift!
If set too high, this will lead to a delay in the feed output shut-off.
Settings
The LowLift height is adjusted by moving the magnetic switch up or down in its holder by turning the
wing screw (A), which should then be locked using the wing nut (B).
Settings
