background image

Warranty Information

See Vaddio Warranty, Service and Return Policies posted on

support.vaddio.com

for complete details.

Hardware* warranty:

Two (2) year limited warranty on all parts and labor for Vaddio manufactured

products. Vaddio warrants its manufactured products against defects in materials and workmanship for a
period of two years from the day of purchase, to the original purchaser, if Vaddio receives notice of such
defects during the warranty. Vaddio, at its option, will repair or replace products that prove to be
defective. Vaddio manufactures its hardware products from parts and components that are new or
equivalent to new in accordance with industry standard practices.

Exclusions:

 The above warranty shall not apply to defects resulting from improper or inadequate

maintenance by the customer, customers applied software or interfacing, unauthorized modifications or
misuse, mishandling, operation outside the normal environmental specifications for the product, use of the
incorrect power supply, modified power supply or improper site operation and maintenance. OEM and
special order products manufactured by other companies are excluded and are covered by the
manufacturer’s warranty.

Vaddio Customer Service:

 Vaddio will test, repair, or replace the product or products without charge if the

unit is under warranty.  If the product is out of warranty, Vaddio will test then repair the product or
products. The cost of parts and labor charge will be estimated by a technician and confirmed by the
customer prior to repair. All components must be returned for testing as a complete unit. Vaddio will not
accept responsibility for shipment after it has left the premises.

Vaddio Technical Support:

 Vaddio technicians will determine and discuss with the customer the criteria

for repair costs and/or replacement. Vaddio Technical Support can be contacted by email at

[email protected]

or by phone at one of the phone numbers listed on

support.vaddio.com

.

Return Material Authorization (RMA) number:

 Before returning a product for repair or replacement

request an RMA from Vaddio’s technical support. Provide the technician with a return phone number, e-
mail address, shipping address, product serial numbers and original purchase order number. Describe the
reason for repairs or returns as well as the date of purchase. See the General RMA Terms and Procedures
section for more information. RMAs are valid for 30 days and will be issued to Vaddio dealers only. End
users must return products through Vaddio dealers. Include the assigned RMA number in all
correspondence with Vaddio. Write the assigned RMA number clearly on the shipping label of the box when
returning the product. All products returned for credit are subject to a restocking charge without
exception. Special order product are not returnable. 

Voided varranty:

 The warranty does not apply if the original serial number has been removed or if the

product has been disassembled or damaged through misuse, accident, modifications, use of incorrect
power supply, use of a modified power supply or unauthorized repair.

Shipping and handling:

 Vaddio will not pay for inbound shipping transportation or insurance charges or

accept any responsibility for laws and ordinances from inbound transit. Vaddio will pay for outbound
shipping, transportation, and insurance charges for all items under warranty but will not assume
responsibility for loss and/or damage by the outbound freight carrier. If the return shipment appears
damaged, retain the original boxes and packing material for inspection by the carrier. Contact your carrier
immediately.

Products not under warranty:

Payment arrangements are required before outbound shipment for all out of

warranty products. 

14

Installation Guide for the RoboSHOT IW Architectural PTZ Conferencing Camera

Содержание RoboSHOT IW





















Отзывы: