Quick-Connect CCU Kit for BRC-H900 Camera
© 2012 Vaddio - All Rights Reserved. Document Number 342-0507 Rev A Page 4 of 16
Overview:
The Vaddio Quick-Connect CCU system for the BRC-H900 camera allows the user to control
the color output of the camera’s image sensor through both Red and Blue Gain controls, Detail,
as well as Iris and Gain levels, to provide a higher quality image. In addition, there are also
color parameters that control the color level, phase and the offset. Gain and White Balance
adjustments for added fine-tuning of the cameras image.
Figure: Front Panel of the Quick-Connect CCU for the BRC-H900 Camera
The Quick-Connect system uses high speed differential signaling (HSDS) which, is an active video transmission
method that delivers low-loss, high-quality video over Cat- 5 cabling distances up to 500’ (152.4m).
The BRC-H900 Camera with 3CMOS, ½” Exmor image sensors produces vivid HD video quality and the CCU is
capable of delivering any resolution of high definition video that the camera produces (1080i/59.94/50 and
720p/59.94/50) as well as composite video in either NTSC or PAL formats.
The CCU has many features, including Tally illumination on the front panel and on the on the camera which
allows the presenter to know which camera is live and what CCU to adjust if a tweak is needed. Genlock is
delivered to the camera over Cat-5 with a level adjustment on the EZIM CCU. The ability to store settings on two
discrete Scene buttons is included, and buttons for Auto White Balance, One Push White Balance and Auto Iris
programming are also available.
The systems are available as a WallVIEW CCU H900 System with the Camera included, or as a Quick-Connect
CCU H900 Kit without the camera.
Important Safeguards:
Read and understand all instructions and warranty statements before using. Do not operate any device if it has
been dropped or damaged. In this case, a Vaddio technician must examine the product before operating. To
reduce the risk of electric shock, do not immerse in water or other liquids and avoid extremely humid conditions.
Intended Use
Before operating the device, please read the entire manual thoroughly. The system was designed, built and
tested for use indoors, and with the provided power supply and cabling. The use of a power supply other than the
one provided or outdoor operation has not been tested and could damage the device and/or create a potentially
unsafe operating condition.
Save These Instructions
The information contained in this manual will help you install and operate your product. If these instructions are
misplaced, Vaddio keeps copies of Specifications, Installation and User Guides and most pertinent product
drawings for the Vaddio product line on the Vaddio website. These documents can be downloaded from
www.vaddio.com
free of charge.
General Safeguard: Use only the power supply provided with the system. Use of any
unauthorized power supply will void any and all warranties. Please do not cut the
secondary side (or the DC side) of the power supply and attempt to extend the power to the
camera. The warranty is voided when the cable is cut.
Please do not use “pass-thru” type RJ-45 connectors. These pass-thru type connectors do not
work well for professional installations and can be the cause of intermittent connections which,
can result in the RS-232 control line failing and locking up, and/or compromising the HSDS™
signals. For best results please use standard RJ-45 connectors and test all cables for proper pin-
outs prior to use and connection to Vaddio product.
