HuddleSTATION
Vaddio HuddleSTATION - Document Number 342-0692 Rev B
Page 10 of 44
Image: MicDock Side View
(Flying Saucer View)
Image: MicDock Connector Panel Bottom View with Call-outs
(Dock turned over to read connector labels)
1) Network
Connector
: Courtesy 10/100 Ethernet port for connection to the PC. Incorporates an embedded
Ethernet switch. Must have LAN connection on the Camera/Sound Bar (primary network connection) for this
network port to function at the MicPOD Dock.
2) LINK Connector:
Proprietary high speed digital link between MicDock and the Camera/Sound Bar.
Proprietary link carries bidirectional audio, video, and control. It also supplies power from Camera/Sound Bar
to the MicDock. The system uses a supplied 25’ (7.62m) Cat-6 SSTP cable with individually shielded pairs to
connect Link ports. A 50’ (15.24 m) Cat-6 SSTP cable is available as an option. The LINK port is marked in
red on both sides. Connect the LINK cable from the Camera/Sound Bar to the MicDock prior to connecting
the system power supply.
Do not substitute the LINK cable. Use only Vaddio LINK cables.
3) PC Input (VGA/RGBHV):
DE-15 female for connection of PC’s analog output to the HuddleSTATION.
4) PC HDMI Input:
HDMI connector for PC’s HDMI output to the HuddleSTATION.
5) USB
Connector:
USB Micro-B connector for interfacing PC’s USB Host interface to the HuddleSTATION.
Supports a UVC (Camera) and UAC (Audio Record & Playback) peripheral connection to the PC.
6) Condenser Microphone x 4:
Four (4) high quality condenser mics located on the lower shell of the Dock
provide a 360° pick-up audio pattern for meeting participants
➊
➋
➌
➍
➊
➎
➍
➎
➋
➌
➏
