HuddleSTATION
Vaddio HuddleSTATION - Document Number 342-0692 Rev D
Page 6 of 44
Save These Instructions
The information contained in this manual will help you install and operate your product. If these instructions are
misplaced, Vaddio keeps copies of Specifications, Installation and User Guides and most pertinent product
drawings for the Vaddio product line on the Vaddio website. These documents can be downloaded from
www.vaddio.com free of charge.
Unpacking
Carefully remove the device and all of the parts from the packaging. Unpack and identify the following parts:
HuddleSTATION Base System 999-8910-000 (North America)
One (1) HuddleSTATION Camera/Sound Bar
One (1) HuddleSTATION Huddle Dock (Controller and Dialer)
One (1) HuddleSTATION 25’ (7.62m) Cat-6 SSTP Shielded LINK Cable
One (1) 24 VDC 3.0 Amp Power Supply with North American Power Cable
One (1) Installation and User Guide
HuddleSTATION Base System 999-8910-001 (International)
One (1) HuddleSTATION Camera/Sound Bar
One (1) HuddleSTATION Huddle Dock (Controller and Dialer)
One (1) HuddleSTATION 25’ (7.62m) Cat-6 SSTP Shielded LINK Cable
One (1) 24 VDC 3.0 Amp Power Supply
One (1) Euro Power Cable
One (1) UK Power Cable
One (1) Installation and User Guide
HuddleSTATION or GroupSTATION Options/Accessories
HuddleSTATION or GroupSTATION Wall Mounting Kit
One (1) Premium Wall Mount with integrated cable tray
One (1) Pair Z-clips for the back of the Camera/Sound Bar
Four (4) 8-32 x 5/16” Phillips pan head screws for Z-clip
Six (6) Spiral drywall anchors
Six (6) #8 x 1.25” Screws for wall anchors
Z-Clip Top
Channel
Integrated
Cable Tray
1.125” Cut-outs
for in-wall cable
management X 3
Image:
Camera/Sound Bar
Mounted above a 46”LED
Monitor.
All cables are hidden in the
integrated cable tray.
For best results
, locate the
cable tray of the mount behind
and below the top edge of the
monitor (as pictured).
2” x .75” Cutout
Bottom of Tray
Z-Clips Attach to the Back of
the Camera/Sound Bar and
Hang on the Z-Clip Top
Channel on the Wall Mount
