VADDIO CeilingVIEW 70 PTZ HideAway, Руководство пользователя

Страница: 8 / 14

CeilingVIEW 70 PTZ HideAway – Document 341- 075 Rev. D
Page 8 of 14
Vaddio supplies this control specification for the CeilingVIEW 70 PTZ HideAway
camera. This VISCA control set (as used in Sony EVI cameras) is used in
conjunction with additional Vaddio control commands (see comment section on
Table 1) for added functionality of the camera lift.
Communication Speed: 9600 bps (default)
Start bit:
1
Stop bit: 1
Data bits: 8
Parity: None
The control codes for the CeilingVIEW 70 PTZ HideAway are the same codes
used with the EVI-D70 pan/tilt/zoom camera. Vaddio is not translating these
codes and does not add any translation or memory capability to enable use of the
EVI-D70 camera as a main or auxiliary camera with videoconferencing system
codecs or the associated IR remote controllers.
For best control results, use the provided RM-EV100 IR Remote Controller or the
VISCA Commands (detailed in Table 1 below) with an external control system.
Table 1: VISCA Command List
RS-232
Command Set
Command Command Packet* Comments
AddressSet Broadcast 88 30 01 FF Address setting
IF_Clear Broadcast 88 01 00 01 FF I/F Clear
CommandCancel 8x 2p FF p: Socket No.(=1or2)
On 8x 01 04 00 02 FF
Power ON –
Lowers Camera Lift
Mechanism
and Turns camera ON
CAM_Power
Off(Standby) 8x 01 04 00 03 FF
Power OFF –
Retracts Camera Lift
Mechanism
and Turns camera OFF
Stop 8x 01 04 07 00 FF
Tele(Standard) 8x 01 04 07 02 FF No
Wide(Standard) 8x 01 04 07 03 FF
Tele(Variable) 8x 01 04 07 2p FF p=0
（
Low
）～
7
（
Fast
）
Wide(Variable) 8x 01 04 07 3p FF
CAM_Zoom
Direct 8x 01 04 47 0p 0q 0r 0s FF pqrs: Zoom Position
D-Zoom On 8x 01 04 06 02 FF Digital Zoom ON/OFF
CAM_Dzoom
D-Zoom Off 8x 01 04 06 03 FF
Stop 8x 01 04 08 00 FF
Far(Standard) 8x 01 04 08 02 FF
Near(Standard) 8x 01 04 08 03 FF
Far(Variable) 8x 01 04 08 2p FF
p=0 （ Low ）～ 7 （ High ）
Near(Variable) 8x 01 04 08 3p FF
Direct 8x 01 04 48 0p 0q 0r 0s FF pqrs: Focus Position
Auto Focus 8x 01 04 38 02 FF AF ON/OFF
Manual Focus 8x 01 04 38 03 FF
CAM_Focus
Auto/Manual 8x 01 04 38 10 FF
RS-232
COMMAND LIST
Communication
Specification
*Communication Example:
For the VISCA Packet “8x 01 04 07 03 FF”
(CAM_Zoom_Wide), “x” corresponds with
the number and order of the camera in the
control chain (daisy chain) where x = 1 for
the first camera, x = 2 for the second
camera, etc…
Control
Disclaimer
Command List