AV Bridge CONFERENCE
10
Selecting Streaming Type
: The type of streaming, USB (MJPEG with PCM audio) or IP (H.264 with AAC audio)
are selectable from the front panel. This menu screen displays the IP streaming resolution and quality.
Network Settings:
The Network settings is a “read only” message representing the current IP addresses defined
for the AV Bridge CONFERENCE by the webpages. Properties displayed include:
•
Mac Address:
•
IP Address:
•
Subnet Mask:
•
IP Gateway:
•
Net Type: DHCP
Hotkey Buttons and Indicators:
A number of common user controls have been included on the front panel for
quick access by the user during a streaming session. Dedicated controls and indicators include:
•
Video Mute
: Stops the video input source from being sent to the Host PC and replaces with a color bar
image. The Video Mute button will be backlit Red when in mute state.
•
Audio Mute:
This button mutes the input audio source being sent to the Host PC. The Audio Mute button
will be backlit in red when in mute state.
•
Audio Level:
A rotary control with 10 steps (but goes to 11) allows the user to adjust the audio input level
being sent to the Host PC. A visual volume level is presented on the LCD to provide feedback of the current
audio level. (Note: This level is not the same as the PC’s record channel volume controls.) The audio
ladder will show a relative volume level as it is adjusted however, after it shows that level for a few seconds it
will act as a VU meter.
•
Video Input LED:
A visual LED indicator represents the current video source being sent to the Host PC. The
selected source is indicated with a blue LED.
•
Audio Input LED:
A visual indication of current audio input source being sent to the Host PC. The selected
source is indicated with a blue LED.
