AV Bridge CONFERENCE
9
System Configuration and Programming
Front Panel Menu System
The front panel menus allow some basic configuration of the AV Bridge CONFERENCE and serves to display the
important system parameters and settings. The menu tree is listed below:
> Start Page: Initializing and Audio Ladder Appear
> Main Menu
> Audio Inputs (Selectable from front panel)
> Unbalanced (High Z)
> Balanced (Low Z)
> Video Inputs (Selectable from front panel if connected to video source only)
> Auto (if only one video input exists)
> HD YPbPr
> HD RGBHV
> HDMI
>SD (Standard definition composite video, NTSC or PAL)
> Streaming
> USB Streaming
> IP Streaming (resolution and quality will be shown)
Resolution
(i.e. 720p)
Quality
(i.e. High Quality, Standard, Low Bandwidth)
>Network Configuration (read only)
>Host Name
> Network Settings (read only)
> Mac Address:
> IP Address:
> Subnet Mask:
> IP Gateway:
>Type: DHCP or Static
> Version
> 1.0.0 (version number will change if/when the device is updated)
Menu Selections
Video Input Selection
: This allows the user to select between Auto-Detection, HDMI, HD, or SD video inputs.
These selections correspond to the connectors on the back panel of the AV Bridge CONFERENCE.
•
The HDMI connector only accepts HDMI and DVI signals up to 1080p/60.
•
The HD connector (DE-15) will support signal formats of up to 1080p/60 on either YPbPr or RGBHV inputs.
•
The composite video input Standard Definition only at resolutions of 480i/NTSC and 576i/PAL. This input is
not an SDI or HD-SDI input,
it’s just
standard definition
,
composite video
on a BNC connector.
Audio Input Selection:
The user has the ability to select between the balanced stereo audio line input and an
unbalanced stereo line input.
