AV Bridge CONFERENCE
3
Rear Panel Connectors and Features
Power Connector
: Use with provided desktop 18 VDC, 2.75 Amp power supply.
DIP Switches:
Used to reset device to factory defaults. Setting all DIP switches to the off-position will reset the
unit to factory defaults on the next power cycle.
RS-232:
RS-232 communication port on an RJ-45 connector supporting Vaddio’s serial command protocol.
Used for interfacing with Crestron/AMX control systems.
USB Port:
USB Type-B connector interfaces to the Host PC.
AV Bridge CONFERENCE
Emulates a USB webcam
and USB speakerphone device.
Network:
10/100 Ethernet port for browser-based configuration and management of the AV Bridge
CONFERENCE. The Ethernet port will stream H.264 and AAC audio.
Video Inputs:
Video inputs supporting HDMI, HD or SD (Standard Definition, NTSC or PAL formats). The HD
connection supports either YPbPr or select wide screen RGBHV resolutions on the DE-15 connector. Video
sources can be switched during a USB streaming session.
Balanced Audio Input and Output
: Balanced line level (+4dBu) audio I/O on XLR connectors
Unbalanced Audio Input and Output
: Unbalanced line level (-10dBV) audio I/O on RCA connectors.
Note:
The audio inputs are line level and user selectable between balanced or unbalanced.