vacuumbrand PC 510 select Скачать руководство пользователя страница 33

Страница: 33 / 88

20901101_EN_PC5xx-6xx_VARIO_select_Serie_V1.0_280618

Installation and connection

Check installation

conditions

Lift the unit out of the pack

aging by the recessed grips.

Transport the pumping unit

Hold the pumping unit at the handle with one hand and tip it

slightly backwards. Then reach below the pumping unit in the

front with the other hand and lift the pumping unit. Or: Use the

recessed grips on the side, underneath the pump heads

Note: For transport, do not lift at the emission condenser/separa

tor holders!

4.2 Installation

NOTICE

Condensate can damage the electronics.

A large temperature difference between the storage location

and the installation location can cause condensation.

After goods receipt or storage, allow your vacuum device to

acclimatize for at least 3‑4 hours before initial use.

Check installation conditions

The device is acclimatized.

Ambient conditions have been observed and are within the limi-

tation of use.

The pump must have a stable and secure base without addi-

tional mechanical contact apart from the pump feet.

Transport the

pumping unit

Содержание PC 510 select

























































































Результаты поиска

Содержание PC 510 select

Отзывы:

Бренды по названию

Популярные бренды

vacuumbrand PC 510 select, Инструкция по эксплуатации

Результаты поиска

Содержание PC 510 select

Отзывы:

Бренды по названию

Популярные бренды