vacuubrand RC 6 Скачать руководство пользователя страница 38

Страница: 38 / 58

page 38 of 58

Special oils:

Rotary vane pump oil K8

The rotary vane pump oil K8 is a special oil designed for pumping acid

vapors. The oil is very hygroscopic and has a limited capacity for acids.

With decreasing pH, the anticorrosive effect decreases as well, and it is

necessary to change the oil at appropriate intervals. When the pump will

stand still for prolonged periods (i.e., for several days), the oil must be

drained and the pump must be filled with mineral oil.

Synthetic oil (perfluoropolyether oil, e.g., Fomblin

Synthetic oils have an excellent chemical resistance and are certified

for pumping pure oxygen. Therefore these oils are excellent for handling

strong oxidants, e.g., halogens, nitrogen oxides, etc.

Attention:

As perfluoropolyether oils mixed with mineral oils result in an

emulsion, pumps used with these oils must be absolutely free of any

residues of mineral oils. To accomplish this, you must completely disas-

semble and diligently clean the pump unit.

* reg. trade mark Montedison

Attention if using special oils:

Due to a different viscosity / density com-

pared to the standard oil, pumps filled with special oil may not achieve

the specified ultimate pressure, or the pumps may not start reliably at

temperatures below 54°F (12°C).

VACUUBRAND B-oil

1 liter (1.06 qt) ...............................................................................................

687010

5 liter (5.3 qt) .................................................................................................

687011

20 liter (5.3 gal)..............................................................................................

687012

200 liter (52.8 gal)..........................................................................................

687013

Rotary vane pump oil K8

1 liter (1.06 qt) ...............................................................................................

687100

5 liter (5.3 qt) .................................................................................................

687101

20 liter (5.3 gal)..............................................................................................

687102

Perfluoropolyether oil

500 ml (0.53 qt) .............................................................................................

687600

Содержание RC 6



























































Результаты поиска

Содержание RC 6

Отзывы:

Похожие инструкции для RC 6

Бренды по названию

Популярные бренды

vacuubrand RC 6, Инструкция по эксплуатации

Результаты поиска

Содержание RC 6

Отзывы:

Похожие инструкции для RC 6

Бренды по названию

Популярные бренды