page 13 of 118
General information
Remove all packing material from the packing box. Re-
move the product from its packing-box and retain all pack-
aging until the equipment is inspected and tested. Re-
move the protective caps from the inlet and outlet ports
and retain for future use. Inspect the equipment promptly
and carefully.
If the equipment is damaged, notify the supplier and the
carrier in writing within three days. Retain all packing ma-
terial for inspection. State the item number of the product
together with the order number and the supplier’s invoice
number. Failure to check and give notice of damage will
void any and all warranty claims for those deficiencies.
Replace the protective caps, if the equipment is not used
immediately. Store the equipment in dry and non-corrosive
conditions (see also “Technical data”, pg. 28).
+
Do not use any damaged equipment.
• Use the mounted handle or the recessed grips when
moving the pump.
Intended use
The vacuum pump may only be used indoors in a dry,
non-explosive atmosphere.
An attached vapor condenser (accessory) is exclusively
intended for the condensation of vapors and for collecting
liquids.
Intended use also includes:
+
Observing the information in the document Safety in-
formation for vacuum equipment.
+
Observing the manual.
+
Observing the manual of connected components.
+
Regularly inspecting the vacuum pump according to
its operating conditions and have this carried out by
NOTICE
