vacuubrand MD 12C NT VARIO o.C., Инструкция по эксплуатации

Страница: 38 / 92

38 20901544_E12C+16C_NT Vsel_V1.2_260922
Installation and connection
>
Use the power plug which fits your power supply.
>
Do not use multiple sockets connected in series as the
power connection.
>
The mains plug is a disconnecting device to separate the
pump from the supply voltage. Ensure that the mains plug is
easily accessible at all times to allow the separation of the
device from the power supply.
Connection options for vacuum accessories
The VACUU·BUS interface functions as the power supply and
control line for vacuum accessories.
1. Connect your accessories to your controller via the
VACUU·BUS cable.
2. If necessary, increase the range and the number of connec ‑
tions with a suitable Y‑adapter and extension cable.

see accessories in chapter
8 .2 Ordering information on page 8 .2 Ordering information on page
83 83
.
IMPORTANT!

Example
Schematic drawing
of controller with
connected valve and
sensors