manualshive.com logo in svg

vacuubrand MD 12C NT VARIO o.C., Инструкция по эксплуатации

Поделиться
Скачать
vacuubrand MD 12C NT VARIO o.C. Скачать руководство пользователя страница 27

27

20901544_E12C+16C_NT Vsel_V1.2_260922

Installation and connection

4  

4   Installation and connection

Installation and connection

4.1  

4.1  Transport

Transport

Products from 

VACUUBRAND

 are packed in sturdy, recyclable 

packaging.

The original packaging is accurately matched to your 

product for safe transport.

 

>

If possible, please keep the original packaging, e. g., for 

returning the product for repair.

Goods receipt

Check the shipment for transport damage and completeness.

 

>

Immediately report any transport damage in writing to the sup

‑

plier.

Unpacking

a

b

c

(a) = diaphragm pump (shown here with vapor condenser accessory)

(b) = manual, cable, and any accessories

(c) = controller, vacuum sensor, cable

 

>

Remove all enclosed packages from their original packaging 

and unpack them.

 

>

Compare the scope of delivery with the delivery note.

 Example

Diaphragm pump in 

original packaging 

with enclosed 

packages 

Содержание MD 12C NT VARIO o.C.





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды