3
Product Overview
Scratch-Resistant Housing
Air/Gas Inlet
Power Cables
Smoke Solution Dipstick
Control Panel
(See panel on next page)
Basic Instructions
Remote Control Fob
(Red button controls ON/OFF.
Gray button control MODE)
Water Separator / Filter
(inside tester) with filter drain port on underside of Tester; keeps tester and vehicle
clean by automatically draining water and contaminants from workshop air compressor. It is normal to
occasionally see drainage of fluid from this port. But excessive drainage indicates your air compressor
requires draining and/or a filter system.
IMPORTANT NOTE:
In order for the moisture and contaminants that collect in the filter bowl of the Tester to
drain, the air supply to the Tester must be disconnected and re-connected at the Tester’s Air Fitting. So do
not leave air supply to the Tester connected for days at a time, or the filter will never drain. It is sufficient to
occasionally disconnect/ connect air supply to tester. This procedure is not necessary if using dry nitrogen.
Filter Drain Port
Underside of Tester
Power Plug
Smoke Supply Hose
