1 . "Set" Button
- After plugging the unit in, press the "Set" button when the
vacuum cover is open to switch the settings between vacuuming time, sealing
time, and cooling time:
• When the "Vacuum" light is illuminated, adjust vacuum time through the
"Up / Down" buttons (range 5 - 90 seconds).
• When the "Gas" light is bright, adjust inflation time through the "Up / Down"
buttons (range 0 – 10 = 0 – 5 seconds).
• When the "Sealing" light is lit , adjust sealing time through the "Up / Down"
buttons (range of 0 - 6 seconds).
• When the "Cooling" light is on, adjust cooling time through the "Up / Down"
buttons (range of 0 - 10 seconds).
2 . Indicator Light
- When switching settings using the "Set" button, the
corresponding indicator light will light up; adjust time through the "Up / Down"
button.
3 . "Marinate" Button
- Press "Marinate" and the machine enters into marinate
mode. Press the "Up / Down" buttons to choose different marinate times.
The LED display changes in units of 9, with optional times between 9 and 99
minutes (it switches every 9 minutes for a work cycle, from vacuum to keep
vacuumming to release).
Control panel
4
7
10
9
6
2
5
3
8
1
4
