background image

When using electrical appliances, basic safety should always be followed:

1. Read all instructions before operating, cleaning or servicing this wrapping station.
2.  To protect against risk of electrical shock, do not place cord, plug or base in water or 

other liquids.

3. Do not use outdoors.
4. Close supervision is necessary when any appliance is used near children.
5. The wrapping station must be placed on a steady table.
6. Unplug the wrapping station when not in use and before cleaning or servicing.
7. Avoid contact with moving parts.
8.  Do not operate wrapping station if it has malfunctioned or has been dropped or dam

-

aged. Call our toll-free customer support service number for information or examina

-

tion of a faulty unit that may require repair or an adjustment.

9. Do not operate wrapping station if power cord or plug shows evidence of damage.
10. Do not operate if Hot Plate or Cut Off Bar temperatures exceed 340°F, or if smoke is 

detected.

11.  Be aware of power cord location. Do not let cord rest on or touch hot surfaces. Do 

not allow cord to hang freely over table or counter.

12. Keep body parts and clothing away from heating elements.
13. Do not touch or operate switches or cords with wet hands.
14. Do not place or store combustibles on or near the wrapping station.
15. Insure that the plug has good ground connection.
16. When unplugging wrapping station, pull on the plug. Do not pull on the cord.
17. This wrapping station was designed for commercial use only.

1

Important Safeguards  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1-2
Wrapping Stations  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .2
Replacement Parts   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .3
Operating Instructions   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .3
Film Loading Diagram .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .3
Cleaning the Unit .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .4
Servicing the Unit   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .4
Fuse Replacement .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .4
Wiring Diagram   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .5
Model Specifications .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .5
Warranty  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .6

table of contents

important safeguards

save these instructions

Содержание 186WM12








Отзывы: