Caution
• Hot Surfaces - Avoid Contact!
• To provide continued protection against electric shock, connect only to properly grounded
outlets.
• Do not attempt to repair or replace any parts other than the replacement parts listed in these
instructions. Improper repair or replacement may result in electrical hazards.
• Do not attempt to repair or replace any parts other than the replacement parts listed in these
instructions. Improper repair or replacement may result in electrical hazards and will void the
warranty.
2
wrapping stations
186WM12, 186WM18
CUT OFF ROD
INDICATOR LIGHT
(BEHIND SIDE SPLASH)
HOT PLATE
ASSEMBLY
TEFLON® COVER
THERMOSTAT KNOB
COVER PLATE
FILM ROLL
BEARING BLOCK
WING NUT
PLASTIC CAPS
FILM ROLL BAR
POWER CORD
(UNDERNEATH
COVER PLATE)
ON/OFF SWITCH
(UNDERNEATH
COVER PLATE)
