VacPak-It 186VMC10V, Быстрый старт

Страница: 6 / 12

• Read Owner’s Manual carefully before using the machine for the first time.
• Do not use the Vacuum Sealer on wet or hot surfaces, or near a heat source
• Do not immerse machine or power cord in water or any other liquid.
• Plug Vacuum Sealer into grounded power sources only, do not use extension cord.
• To disconnect, unplug directly from power source.
• Do not disconnect by pulling on cord.
• Do not operate appliance with damaged power cord.
• Only use the Vacuum Sealer for its intended use.
• During the machine working, do not touch the vacuum lid, vacuum chamber and seal
bar to avoid getting bruised, burns or damaging the machine.
• Cleaning and maintenance of the machine should not be done with children in the
absence of adult care.
• When the power cord is damaged, it must be replaced by a manufacturer, or its agent, or
Qualified professional maintenance personnel, in order to avoid any accidental injury.
SAFETY
• After each day’s use or when the machine is dirty, remove the seal bar and wipe
down the chamber, lid and exterior with a damp cloth and mild soap to remove food
particles and other debris.
• The seal bar should be wiped clean with a damp cloth only.
• Never use an acetone, acetone-based or abrasive cleaner on the lid or other plastic
parts. Parts can become discolored, scratched, or even appear burned if these
materials are used.
• The stainless steel housing should be cleaned and cared for by using a traditional
stainless steel cleaning material.
• Inspect the power cord for tears, frays, or other damage. Do not use machine if the
power cord is damaged.
Routine Cleaning
6.