Vacon NXP, Руководство пользователя

Страница: 88 / 165

COPYING THE FREQUENCY REFERENCE SET FROM I/O OR FIELDBUS TO THE CONTROL
PANEL
1 Keep the Enter button pushed down for 3 seconds.
7.7 USING THE ACTIVE FAULTS MENU (M4)
The Active faults menu shows a list of active faults. When there are no active faults, the
menu is empty.
1 To find the Active faults menu, scroll down
in the Main menu until the location indication
M4 shows on the first line of the display.
READY
I/O term
Active faults
F0
2 To go to the Active faults menu from the
Main menu, push the Menu button Right.
If there is a Fault in the display, these
symbols show:
A
)
Fault symbol
B
)
Fault type symbol (see )
FAULT STOP
I/O term
11 Output phase
T1

T13 F
B
A
For more information on the fault types and how to reset faults, see Chapter 10 Fault tracing.
For the fault codes, possible causes and information on how to correct the fault, see Chapter
10.2 Fault codes.
7.7.1 THE FAULT TIME DATA RECORD
This menu shows some important data that was valid at the time of the fault. This helps you
to find the cause of the fault.
The data available are:
VACON · 88 CONTROL PANEL
7
TEL. +358 (0)201 2121 · FAX +358 (0)201 212 205