Vacon NXP, Руководство пользователя

Страница: 78 / 165

L. The Browser button Up. Use it to scroll
the main menu and the pages of
different submenus and to increase a
value.
7.2 DISPLAY
The drive status indicators (A-G) gives you information about the status of the motor and the
AC drive.
The control place indications (H, I, J) show the selection of the control place. The control
place tells from where the START/STOP commands are given and reference values are
changed. To make this selection, go to the Keypad control menu (M3) (see Chapter 7.6 Using
the Keypad control menu (M3)).
The three text lines (K, L, M) give information about your location in the menu structure and
the operation of the drive.
A
K
L
M
B C D E
H
I
J
F G
READY
FAULT STOP
RUN
Bus/Comm Keypad I/O term
ALARM
Fig. 29: Display indications
A. The motor is in RUN state. The indication
starts to blink when a stop command is
given and blinks while the speed
continues to decrease.
B. The direction of motor rotation is
forward.
C. The direction of motor rotation is
reverse.
D. The drive does not operate.
E. The AC power is on.
F. An alarm is given.
G. A fault is given and the AC drive is
stopped.
H. The I/O terminals is the active control
place.
I. The Control keypad is the active control
place.
J. The fieldbus is the active control place.
K. The location indication. The line shows
the symbol and number of the menu,
parameter and so on. For example, M2 =
Menu 2 (Parameters) or P2.1.3 =
Acceleration time.
L. The description line. The line shows the
description of the menu, value or fault.
M. The value line. The line shows the
numerical and text values of references,
parameters and so on. It also shows the
number of submenus that are available
in each menu.
VACON · 78 CONTROL PANEL
7
TEL. +358 (0)201 2121 · FAX +358 (0)201 212 205