Vacon CX, Руководство по установке

Страница: 15 / 17

Page 1 4 (1 5 )
Va co n I/ O - ex p a nd er b oa r d insta lla tion (Va con CX S- r a ng e)
Vacon Plc Tel: +3 5 8 -2 0 1 2 1 2 1 Fax: +3 5 8 -2 0 1 2 1 2 2 0 5
Service: +3 5 8 -4 0 -8 3 7 1 1 5 0 E-mail: vacon@vacon.com
http:/ / w w w.vacon.com
4 . 4 Va con CX1 0 3 O PT
* ) N O TE!
Thermistor input (terminals 2 2 1 and 2 2 2 ) must be shorted if not used.
Figure 4 -4 Control connections of Vacon CX1 0 3 O PT.
Terminal Signal Description
206 + 2 4 V C ontrol voltage output Voltage for sw itches, etc. max. 5 0 mA
207 G N D I/ O ground G round for reference and controls
208 CM C C ommon for DIC 1 -DIC 5 C onnect to G N D or + 2 4 V
209 DIC 1 External fault C ontact open = no fault
(closing contact) C ontact closed = fault
210 DIC 2 Run disable C ont. open = start of motor enabled
C ont. closed= start of motor disabled
211 DIC 3 Acceler. / Decel. time C ontact open = time 1 selected
selection C ontact closed = time 2 selected
212 DIC 4 Jogging speed selection C ontact open = no action
C ontact closed = jogging speed
213 DIC 5 Fault reset C ontact open = no action
C ontact closed = fault reset
214 G N D I/ O ground
215 I
o ut
+ Analogue output Programble
0 —2 0 mA/ R
L
max. 5 0 0 Ω (M otor current as default value)
221 TI + Thermistor input
222 TI-
223 RO 3/ 1 Relay output 3 READY
224 RO 3/ 2
225 RO 4/ 1 Relay output 4 RUN
226 RO 4/ 2
227 RO 5/ 1 Relay output 5 FAULT
228 RO 5/ 2
Signal from
motor thermistors * )