Vacon 20 x, Инструкция по установке, техническому обслуживанию и ремонту

Страница: 79 / 83

Safe Torque Off vacon • 76
9
9.5.4 Safety Capability Cat.1 / PL
c
/ SIL 1
Without any automatic monitoring of STO output feedback, the safety capability is reduced to Cat. 1
/ PL c / SIL 1. The STO inputs (which can be connected in parallel) must be supplied by a safety push
button or a safety relay.
The picture below shows an example of connection for the STO function. A switch (a safety push but-
ton or a safety relay) may be connected with 2 wires to the drive.
When the contacts of the switch are opened, the STO is demanded, the drive indicates F30 (="Safe
Torque Off") and the motor stops by coasting.
Figure 41. STO example without automatic monitoring of the feedback and STO inputs connect-
ed in parallel. (*)Only for MU3.
The choice of using the STO inputs (without the automatic monitoring of the output
feedback) does not permit to achieve the
other safety capabilities .
The standards for functional safety require that functional proof tests are performed
on the equipment at user-defined intervals. Therefore,
this safety capability can be
achieved, as long as the STO function is manually monitored at the frequency deter-
mined by the specific application
(once a month can be acceptable) .
This safety capability can be achieved by connecting in parallel the STO inputs exter-
nally and by ignoring the use of the STO output feedback.
R
R
R
R
=
3
S1
G1
S2
G2
L1
L2
L3
F+
F-
U
V
W
DC+/R+ R- DC-*
SWITCH
Reinforced
POWER UNIT
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com