VACC-SAFE CO
2
Incubator
9
2.3. Location of installation and ambient conditions
Do not put inflammable substances near the product. (It can cause a fire)
When you install the product, you have to put the distance of at least 30cm from
the wall. To completely separate the unit from the power supply, power plug must
be disconnected. Install the unit in the way that the power plug is easily accessible
and can be easily pulled in case of danger.
Install the unit at a flat surface, free from vibration and in a well-ventilated location.
(If the ground is not flat, it can cause an excessive vibration of the product.)
When you move the product, do not lay down to its side or reverse the head to
bottom. (It can cause a malfunction.)
When you move the product, hold the door and other movable parts of the product
with a tape. (When the product is moved, the movable door can cause injury of you
and damage of the product.)
When you move the product, you must hold up the product.
(Pushing or pulling the product can damage the bottom part of the product.)
CO
2
, as well as O
2
, and N
2
are harmful in human when in high concentrations. Any
excess has to be led out via good room ventilation or by connection to a suitable
exhaust system.
