VACBOT S200, Руководство пользователя

Страница: 9 / 32

9
NOTES
09 BATTERY INSTALLATION
10 BATTERY REMOVAL
1. The vacuum and floor mopping robot is suitable for hard floors and low to medium pile carpets.
2. This vacuum and floor mopping robot is not suitable for very uneven surfaces. Do not use in long pile/
tick carpet. Fold carpet fringes under the carpet before starting operation.
3. Please note that this robot will collect dust and small particles. It will not clean paper, plastic bags and
other large debris. It will get entangled in wires, so please declutter floor surfaces before using.
4. Do not leave bottles, lamps or other breakables on the floor.
5. Do not use in tight spaces less than 38cm wide as the vacuum and floor mopping robot may get blocked.
6. Do not use on wet or greasy dust.
The vacuum and floor mopping robot battery is user replaceable. If the battery stops keeping its hold,
please re-order replacement form the manufacturer or service centre.
1. Push the dust bin release button and pull out the dust-bin. Flip the robot over and push the battery into
the slot.
2. Push the battery until it clicks in.
3. Flip the vacuum and floor mopping robot over again and insert the dust bin back into the body.
1. Remove the dust bin first and flip the vacuum and floor mopping robot over.
2. Push the two battery hook buttons simultaneously. The battery will pop out automatically.
3. Remove the battery.