VACBOT S200, Руководство пользователя

Страница: 16 / 32

16
Collided Button:
1. Press this button to activate or to shut down the function.
2. Before the vacuum and floor mopping robot starts cleaning, it is suggested to clean up small items, like
clothing, power cords, cables and loose fringes of rugs.
3. Check if the dust-bin is full and empty it out before starting the cleaning cycle.
4. Press the Power Button to activate the vacuum and floor mopping robot.
5. Use the remote control to set up the preferred cleaning time or cleaning cycle. The vacuum and
floor mopping robot can clean a 6 to 8 square meters area in 10 minutes. However this ration varies
depending on types of floors and the complexity of the space.
6. Users may interrupt the robot’s cleaning cycle at any time by pressing the Start/Stop button either on
the robot panel or the remote control. By pressing the button again, the vacuum and floor mopping
robot will resume the previous cleaning cycle.
1. First, press the button “Time”. The LCD display will show “Time Setting”.
2. Press the “Week” button to choose the correct weekday.
3. Once the chosen weekday appears on the display, press the button again.
4. Follow the previous steps to complete the settings of “Hour” and “Min”.
Users may program the vacuum and floor mopping robot to perform the cleaning cycle on any preferred
day and time. This scheduling function is built into the Home Base with the LCD display and several setting
buttons. In order to perform this function, the Home Base needs to be plugged in at all times.
20 SCHEDULING
21 SETTING YOUR LOCAL TIME