VACBOT S200, Руководство пользователя

Страница: 22 / 32

22
3. Let the Sonic Wall Start to Study
If the two symbols are all light up, please clear previous ID from the main unit. If any of the two
symbols is not light up, please follow the steps below.
Step 1: Power on the Sonic Wall so the power LED lights up.
Step 2: Use one of toothpick to insert the hole at the back of the Sonic Wall and press down when you
hear “BI” sounds. One of the two symbols will light up what means the Sonic Wall has
completed the study.
Note: If there are more sonic walls need to study, please operate above steps again, and at most you
can play three sonic walls at the same time.
4. Let the Main Unit Exit Study Mode
Push the power button to exit the study mode and the main unit will complete the study.
5. Clear Previous Information of Main Unit
Let the unit into study mode (see step a) and press the Home button all the time until you hear
“DI-DI” sounds. When all of the four indicator lamps symbols are light off it means that previous IDs or
the main unit are already cleared. Now you must reset all ID from the new Home Base, Sonic Wall or
Remote Control.