Vaask WMD-001, Руководство по установке

Страница: 8 / 18

| 8
STEP 1: Locate the studs on either side of the
desired installation location. Optional: Use a stud
finder. Mark with painter’s tape. Ensure there is
at least 9.6 in (24.4 cm) of lateral space between
studs.
STEP 2: Mark the bottom edge of the fixture
cutout 32-42 in (81.3-106.7 cm) above the finished
floor, according to design preference and local
codes.
STEP 3: Cut a hand-sized inspection hole in the
center of the preferred installation location.
Optional: Use an inspection camera to determine
what is behind the wall. Ensure that the depth
between outer wall surface and the next flat
surface inside is at least 3.5 in (8.9 cm) and that
there are no obstructions within the wall cavity.
STEP 4: Using tape, attach the enclosed 9.6 in
(24.4 cm) x 14.5 in (36.8 cm) template to the wall
where you want to place the Vaask fixture. Use a
bubble level to ensure that it is level.
CUT THE HOLE
min 9.6 in (24.4 cm)
32
–4
2 i
n
(8
1.
3–
10
6.
7 c
m
)
1 2 3 4 5 6
min 3.5 in depth
(8.9 cm)
9.6 in (24.4 cm)
14.5 in (36.8 cm)
Sticky tape on
the back of
the template