Vaask WMD-001, Руководство по установке

Страница: 15 / 18

| 15
STEP 19: Put the refill cap back on the
tank and hand-tighten.
STEP 20: Connect the filled tank to the
fixture by inserting the tube fitting into
the connector. You will hear it click when
connected properly.
STEP 21: Press the middle button inside
the door to prime Vaask.
STEP 22: Once the light on the front
panel stops blinking, place your hand
within 4 inches of the dispensing nozzle
to activate the pump and confirm that
sanitizer is dispensing properly.
CLEANING VAASK’S EXTERIOR
Clean exterior as needed with a microfiber cloth and warm
water.
Do not use paper towels or abrasive/harsh cleaners.
This will damage the finishes.