V2 VEGA-24V, Руководство пользователя

Страница: 71 / 148

E
N
G
L
IS
H
69
DISPLAY DATA DESCRIPTION DEFAULT
MEMO
DATA
AUS Auxiliary channel tiM
tiM - Timed function (from 0 to 20’)
biSt - Bistable operation
Mon - Monostable operation
SPiA Setting low voltage exit lights W.L
no - Not used
FLSh - Flasher operation (fixed frequency)
W.L. - Indicator light operation: indicates the status of the door in real-time
LP.PA no / Si Blinker during pause time no
Strt Start input function StAn
StAn - Standard operation
no - Start inputs from terminal board are disabled
StoP STOP input no
no - STOP input not available
invE - STOP command stops the door: START command starts moving in the opposite direction
ProS - STOP command stops the door: pressing the START command door continues the motion
Foto Photocell input CFCh
CFCh - Photocell is active in closing and also when the door is still
no - Not available
Ch - Photocell is active during the closing
Ft.tE no / Si Test of the photocells no
CoSt Safety ribbon input no
no - Input disabled
AP - Input enabled only in opening phase
Ch - Input enabled only in closing phase
APCh - Input enabled in opening and closing phase
Co.tE Test of the safety edges no
no - Test disabled
rESi - Test enabled for conductive rubber safety edges
Foto - Test enabled for optical safety edges
FC.En Limit switch input StoP
StoP - the door stops by the limit switches
rALL - the door begins the slow-down stage (t.rAL menu) by the limit switches
ShAd
- the “shadow area” function is activated when the LEFT micro switch trips and disabled
when the RIGHT micro switch trips
no - Inputs disabled
riLA 0 ÷ 10 Motor release on mechanical stop 2
i.Adi no / Si Enabling the ADI device no
CFG Mt / SL Control unit setting Mt
FinE End programming. no
no - Do not exit the programming menu
Si - Exit from the programming menu, storing the parameters set