V2 SPA ALFARISS, Руководство пользователя

Страница: 66 / 140

E
N
G
L
IS
H
64
DISPLAY DATA DESCRIPTION DEFAULT
MEMO
DATA
dir dx / Sx Gate direction (the direction you see from the inside) dx
En.SA no / Si ENERGY SAVING function no
t.PrE 1.0" ÷ 1’.00 Advance blinking time 1.0”
no - Advance blinking disabled (corresponds to a value of 0)
P.APP 0 ÷ 100 Partial opening 25
Pot 30 ÷ 100 Power motor 60
P.rAL 0 ÷ 70 Power motor during slow-down phase 20
P.bAt no / Si Maximum motor power during battery operation no
SPUn no / Si Starting no
rAM 6 ÷ 0 Advance rate 6
SEnS no ÷ 10.0A Obstacle sensor no
rAPP 0 ÷ 100 Slow down in opening 10
rACh 0 ÷ 100 Slow down in closing 10
St.AP Start during opening PAUS
no - The START command is ignored
ChiU - The gate recloses
PAUS - The gate pauses
St.Ch Start during closure StoP
Stop - The gate completes the cycle
APEr - The gate reopens
St.PA Start during pause ChiU
no - The START command is ignored
ChiU - The gate recloses
PAUS - The pause time is restarted (Ch.AU)
SPAP Pedestrian start during opening PAUS
no - The P. START command is ignored
ChiU - The gate recloses
PAUS - The gate pauses
Ch.AU Automatic reclosure no
no - Automatic reclosure is not activated (corresponds to a value of 0)
0.5"÷ 20.0' - The gate recloses after the set period time
Ch.tr Closure after passage no
no - Closure after passage disabled (load Ch.AU)
0.5"÷ 20.0' - The gate recloses after the set period time
PA.tr no / Si Pause after passage no
LUCi Courtesy lights CiCL
t.LUC - Timed function (from 0 to 20’)
no - Function deactivated
CiCL - On for the entire duration of the cycle
AUS Auxiliary channel Mon
tiM - Timed function (from 0 to 20’)
biSt - Bistable operation
Mon - Monostable operation
13.2 - SUMMARY OF FUNCTIONS