V-ZUG Unimatic SL, Руководство по эксплуатации

Страница: 37 / 56

8 Trouble-shooting
... in the display appears
Foam in main wash:
rinsing extended
Possible cause Solution
▪
If there is very heavy foaming during
the wash cycle, the programme is
automatically extended by an addi-
tional rinsing cycle. This improves
the wash results, but also increases
the duration of the programme. ▸ Reduce the amount of washing detergent
used next time.
▸ Adjust the amount of washing detergent used
to the water hardness.
... in the display appears
Hygiene recommendation:
at least 60 °C programme or select appliance
hygiene
Possible cause Solution
▪ No wash cycle has been carried out
at a temperature of at least 60 °C
for a longer period of time. ▸ With one of the next wash cycles carry out a
wash with at least 60° C.
Or:
▸ Run the «Appliance hygiene» programme
without any washing.
... in the display appears
Inlet water very cold
heating extended
Possible cause Solution
▪ Inlet water very cold. Heating is ex-
tended. No action is necessary.
... in the display appears
Too many articles
heating extended
Possible cause Solution
▪ Selected programme is intended for
a reduced washing load. If there are
too many articles, heating and pos-
sibly also the rinsing will be exten-
ded. ▸ With the next wash cycle adjust the amount
of articles to the max. washing load (see
«Programme overview»).
37