V-ZUG MaxiFlex GK46TIMS, Руководство по эксплуатации

Страница: 13 / 28

4 Operating the appliance
GK56TIMSC, GK56TIMSCO, GK56TIMSZ, GK56TIMSZO
PowerPlus cannot be used with both
cooking zones of a group (
A or B ) at the
same time. If PowerPlus is activated with
both cooking zones of a group, then the
power output is reduced for the cooking
zone that was first selected. Cooking zone
5 can be operated with PowerPlus inde-
pendently of groups A and B .
A B
1
2 3
4
5
PowerPlus with
cooking zone
Group A* PowerPlus with
cooking zone
Group B*
1 2 3 4
1 3
2 4
*Maximum available power level with cooking zones
If the power level is increased above these levels, PowerPlus switches off.
4.10 Bridging function
The bridging function allows two individual cooking zones lying one behind the other to
be switched on together and to be adjusted together.
Switching the bridging function on
▸ Touch both sliders at the same time.
– Illuminates next to the slider.
▸ Set the desired temperature.
If, when the bridging function is switched on, a cooking zone is already running,
the power level and operating time of this cooking zone will be taken over for both
zones. If both cooking zones are already running, the operating times are cleared
and flashes in the power level displays.
Switching the bridging function off
▸ Touch both sliders at the same time.
– Both cooking zones revert to the previous settings.
– Each cooking zone can be regulated individually again.
4.11 Automatic boost
Do not leave the hob unattended when using the automatic boost. Risk of boiling
over, burning on and igniting!
All the cooking zones are equipped with a selectable automatic boost. With this function,
a cooking zone heats at power level for a certain length of time (see table). Then it
automatically switches back to the power level set.
13