AVVERTENZA
Pericolo di lesioni a causa di scossa elettrica!
Sotto il coperchio si trovano elementi sotto corrente.
u
Far sostituire o riparare l’illuminazione interna a LED solo dal
servizio di assistenza o da personale tecnico qualificato.
AVVERTENZA
Pericolo di lesioni dovute alla luce a LED!
L'intensità luminosa dell'illuminazione LED corrisponde al
gruppo di rischio RG 2.
Se la copertura non funziona:
u
non guardare direttamente la luce da vicino utilizzando lenti
ottiche. In caso contrario, gli occhi possono ferirsi.
La guarnizione della porta è difettosa oppure deve essere
sostituita per altri motivi.
→
La guarnizione della porta è sostituibile. La sostituzione non
richiede strumenti ausiliari.
u
Rivolgersi al servizio di assistenza (vedere 6) :
L'apparecchio è ghiacciato o si è formata della condensa.
→
La guarnizione della porta può essere fatta scivolare fuori
dalla scanalatura.
u
Verificare che la guarnizione della porta sia posizionata in
modo corretto all'interno della scanalatura.
8 Messa fuori servizio
8.1 Spegnere l'apparecchio
u
Premere il tasto On/Off
Fig. 2 (1) per
ca. 2 secondi.
w
Viene emesso un lungo beep. Il display della
temperatura è spento. L’apparecchio è spento.
w
Se non è possibile spegnere l'apparecchio, la
sicurezza bambini è attiva (vedere 5.1) .
8.2 Messa fuori servizio
u
Svuotare l'apparecchio.
u
Spegnere l'apparecchio (vedere 8) .
u
Estrarre la spina.
u
Pulire l'apparecchio (vedere 6.2) .
u
Lasciare aperta la porta per evitare la formazione di cattivi
odori.
9 Smaltimento dell'apparecchio
L'apparecchio contiene ancora materiali preziosi e
deve essere smaltito in un centro diverso dalla
raccolta indifferenziata dei rifiuti urbani. Gli appa-
recchi fuori uso devono essere smaltiti a regola
d'arte in conformità alle norme e leggi locali.
Non danneggiare il circuito refrigerante dell'apparecchio fuori
uso durante il trasporto per evitare che il refrigerante in esso
contenuto (dati riportati sulla targhetta identificativa) e l’olio
possano fuoriuscire senza controllo.
u
Mettere fuori uso l'apparecchio.
u
Estrarre la spina di rete.
u
Staccare il cavo di alimentazione.
Messa fuori servizio
* A seconda del modello e delle dotazioni
25