Installation instructions
Built-in variants
Teppan Yaki
GK17TIYSZ, GK27TIYSZ
1014839-R03
21/11/2017
1014839-R03
6
Combination installation
Flush combination installation is described in document 1014381. The intermediate support kit H63789 is required for this.
Installation of the ventilation protective plate with 3 mm ventilation gap at the front
A ventilation protective plate is necessary for the adequate ventilation of the hob.
The distance between the underside of the appliance and the protective plate must be ≥10 mm.
393
(30)
≥
67.5
5..10
53.5
56
ø4
≥
15
(X)
H
≥
3
≤
0.5
2.5
Caution: Mains cable must
not touch protective plate!
Well-fitting seal over
width of cabinet element
Air gap over entire width of
cabinet element
≥
17 cm²
According to template
Fan
Drawer
Type
X
Remarks
GK17TIYSZ, GK27TIYSZ
14.3 mm
Surface-mounted installation
10 mm
Flush installation
H
Dimension from the top of the work surface to the underside of the hob (ventilation opening).
Cool air supply with regard to drawer or cabinet installed below
In order to guarantee good ventilation, a space of ≥10 mm height is necessary beneath the appliance.
Drawer
Centre of fan
Air gap over the entire cabinet element width
≥
5
≥
15
(30)
600/550
GK17TIYSZ ≥400
≥25 cm²
H
B
A
A
Necessary space below the worktop for the appliance.
B
Necessary space below the worktop for the ventilation of the appliance.
H
Dimension from the top of the work surface to the underside of the hob (ventilation opening)
