V-ZUG DI-SE10 076, Руководство по эксплуатации

Страница: 15 / 28

4 Care and maintenance
15
4.2 Cleaning the grease filters
The grease filters should be cleaned at least once a month with normal use
or whenever the
button flashes. If properly cared for, the grease filters
should provide unlimited years of service.
Removing
➤
Press back the grip 2 on the
grease filter 1 .
➤
Carefully pull the grease filter
down and out of the fixture.
Cleaning
➤
The grease filters can be cleaned in a dishwasher.
➤
Select an «intensive» – or «heavy soil» – wash programme with a warm
pre-wash.
If you do not have a dishwasher:
➤
Clean the grease filters in the sink with hot water and detergent.
➤
Then soak the filters in hot water in the sink for about 2 hours and finally
clean with a washing-up brush.
Replacing
➤
Insert the grease filter into the slots at the back.
➤
Push the grip back.
➤
Swing the grease filter up and engage in position.
➤
Hold the button depressed for at least 3 seconds.
➤
The flashing button light goes out.
Take care not to damage the
grease filters.
Cleaning may cause the grease filters to become discoloured.
However, this will not affect the functioning of the filter in any way.
2
1