4 Care and maintenance
16
4.3
Replacing the standard activated charcoal filter
Standard activated charcoal filters are only used in the recirculation model.
A standard activated charcoal filter becomes less effective with use. With
normal use, it has to be changed at least every 4 months or whenever the
button
lights up. It cannot be washed or regenerated.
➤
Remove the grease filter and
clean it.
➤
Turn the two locking knobs
A
by
90° and remove the standard
activated charcoal filter by pulling
it down.
➤
Insert the new standard activated
charcoal filter until it latches at the
back and secure it in the front
with the locking knobs.
➤
Reinsert the grease filter.
➤
Replace the fuse resp. switch the
circuit breaker back on again.
➤
Hold the
button depressed for
at least 3 seconds.
– The luminous button light goes
out.
A dirty standard activated charcoal filter can be disposed of with the
household waste.
90
˚
A
A
Содержание DI-SE10 076
Страница 1: ...Range hood DW SE DI SE Operating instructions V ZUG Ltd ...
Страница 24: ...24 9 Notes ...