![background image](http://html1.mh-extra.com/html/v-zug/cooltronic/cooltronic_service-instructions-manual_3255126056.webp)
V-ZUG AG
Industriestrasse 66, Postfach 59, 6301 Zug
T41 58 767 67 67, Fax +41 58 767 67 67
[email protected], www.vzug.com
Service manual
1036497-00-AE
1
Serial production
created
27.09.2017 waa
modified
28.09.2017 User Agent
checked
28.09.2017 asan
56 / 61
Service manual Platform 2014-2016, V-ZUG KT
1036497-00_ae gedruckt
7.10
Connecting solenoid valve
Connect capillary tube for main cooling compartment
(indicated in blue) and capillary tube for freezing
compartment to refrigerant valve, as shown in image
(capillary tube for main cooling compartment is shown on
left).
7.11
Replacing condenser
Caution!
Only carry out after cooling circuit has been
evacuated and flooded with nitrogen!
1.
Remove noise reduction element. Using soldering
flame, heat and release condenser connections.
Ensure no solder ingress into cold circuit.
(blockages)
2.
Remove screw connections on condenser.
3.
Screw on new condenser.
4.
Solder connections on compressor and frame
heater again.
Remove flux residue.
Put back noise reduction element.