![background image](http://html1.mh-extra.com/html/v-zug/cooltronic/cooltronic_service-instructions-manual_3255126020.webp)
V-ZUG AG
Industriestrasse 66, Postfach 59, 6301 Zug
T41 58 767 67 67, Fax +41 58 767 67 67
[email protected], www.vzug.com
Service manual
1036497-00-AE
1
Serial production
created
27.09.2017 waa
modified
28.09.2017 User Agent
checked
28.09.2017 asan
20 / 61
Service manual Platform 2014-2016, V-ZUG KT
1036497-00_ae gedruckt
Button lock: Press buttons 3 seconds to activate them!
4.2
Main ON / OFF button
To switch the appliance on/off: Hold main
button depressed for 3 seconds.
In OFF position, whenever button and/or door switch is pressed, “Off” is displayed for 30 seconds and then
all displays are switched off and display goes black.
4.3
Setting the temperature
Setting range
Cooling compartment 2°C to 9°C
3°C to 9°C only applies to Cooltronic/eco)
Freezer compartment -14°C to -24°C only applies to Cooltronic/eco
Noblesse/eco
Prestige/T/eco/P eco
Setting the temperature
1. Hold the
preselection button depressed for 3 seconds.
- The temperature of the cooling compartment flashes in the display.
(For the freezer compartment temperature or the cold storage compartment (CSC) temperature,
repeatedly press the preselection button until the corresponding temperature symbol flashes.)
2. Touch
temperature setting button once or more.
Each time sensor is touched, cooling or freezing compartment temperature rises by 1°C or continuously if
sensor held depressed.
- Temperature of cold storage compartment can be set lower, from 2°C to 1°C.
- If no further settings are made after 5 seconds, the current value is accepted and the temperature
display stops flashing.
The temperature can only be adjusted when the display is flashing.
If the temperature setting button is touched without having pressed the preselection button beforehand, a
double acoustic signal is emitted.
Temperature display
The average temperature for the last 2 hours is displayed. The average is updated every 15 minutes using
the temperature that has just been measured.
In the case of Noblesse/eco and Cooltronic/eco, the set value is displayed.
Carrot symbol
If carrot symbol remains illuminated, this means that temperature in cold storage compartment is ideal at
between 0°C and 3°C.
If set temperature of cold storage compartment is flashing, this indicates temperature in cold storage
compartment is too warm or too cold. In this case, the temperature of the cooling compartment was probably
set outside the recommended range (4°C to 6°C ).