![background image](http://html1.mh-extra.com/html/v-zug/cooltronic/cooltronic_service-instructions-manual_3255126023.webp)
V-ZUG AG
Industriestrasse 66, Postfach 59, 6301 Zug
T41 58 767 67 67, Fax +41 58 767 67 67
[email protected], www.vzug.com
Service manual
1036497-00-AE
1
Serial production
created
27.09.2017 waa
modified
28.09.2017 User Agent
checked
28.09.2017 asan
23 / 61
Service manual Platform 2014-2016, V-ZUG KT
1036497-00_ae gedruckt
4.7
Demo operating mode
To switch on/off, see section 4.6.
This operating mode is suitable for exhibiting. The compressor is not switched on so that the refrigerating
appliance does not refrigerate/freeze, preventing unnecessary power consumption. Operation, display,
illumination and alarm functions are active.
In the demo mode, the temperature displayed is not the ACTUAL value but the set value.
Demo mode cannot be reset by interrupting power supply or by using main
ON/OFF button.
4.8
Test operating mode
To switch on/off, see section 4.6.
Essentially for use in final production check.
Function check
1. All symbols and segments (for image, see section 0 on service mode) are displayed for about 5 secs.
(depending on model).
2.
0
is displayed.
Test all buttons including door switch.
Whenever a button is pressed, an acoustic door alarm is emitted and the counter on the display is
increased. If no button is pressed within the next 20 minutes, the electronics set the operating mode to
OFF.
3.
t0
is displayed.
Test mode remains in this state until actual test procedure is started by pressing
special function
button. While
t0
is displayed, a power failure may occur at any time. After a power failure, phase
t0
is
continued. The maximum duration of
t0
is 20 minutes. After 20 minutes in the switched-on mode, the
electronic control unit switches the operating mode from test mode to
OFF
mode.
4. Press
special function button.
5. Test time
t1
(all appliances)
The illumination in the cooling compartment is briefly switched on.
6. Test time
t2
(Cooltronic/eco, Noblesse/eco, Prestige/T/eco/P eco, Classic eco, Futura eco)
The illumination in the freezer compartment is briefly switched on.
7. Test time
t3
(Perfect /Perfect eco, DeLuxe / DeLuxe eco, Futura eco, Classic eco)
The heating element is briefly switched on.
8. Test time
t4
(Cooltronic/eco)
Fan in cold storage compartment is briefly switched on.
9. Test time
t5
(Cooltronic/eco, Noblesse / Noblesse eco, Prestige / T / eco / P eco)