V-ZUG AG
Industriestrasse 66, Postfach 59, 6301 Zug
T41 58 767 67 67, Fax +41 58 767 67 67
[email protected], www.vzug.com
Service manual
1036497-00-AE
1
Serial production
created
27.09.2017 waa
modified
28.09.2017 User Agent
checked
28.09.2017 asan
50 / 61
Service manual Platform 2014-2016, V-ZUG KT
1036497-00_ae gedruckt
3.
Remove defective sensor from holder and cut a
100 mm length off it.
4.
Cut off 30 mm of white insulation. Strip back
approx. 10 mm of black and brown stranded wire
and prepare for new connection (see image).
5.
Messen, ob beide Litzen Durchgang haben. If yes,
install service sensor.
6.
Use service temperature sensor 10128572 (art. no.
176144) with isolated joint as a replacement.
7.
Carefully insert cable ends and clamp with
corresponding tool.
8.
Pin assignment (see section 5.2) Check ohm-
meter measurements for cooling compartment and
freezing compartment sensor to ensure that the
new sensor is functioning properly.