Installation instructions
CombiCooler/Cooler/WineCooler/Freezer
V6000 Supreme, integrated
1091916-R01
07/05/2020
1091916-R01
6
Preparing the installation
Transport and unpacking
The appliance is very heavy! Extreme caution should be exercised when transporting it to prevent injury to people and dam-
age to property.
The appliance must be transported in an upright position – never on its front.
As the appliance is large and heavy, the transport company should inform itself beforehand about access to the site where the appli-
ance is to be installed (door dimensions, room to move on the stairs, etc.). The appliance is secured with four removable brackets at
the bottom of the packaging (pallet). Use a hand-operated trolley to transport the appliance to the site where it is to be installed and
only then remove the bottom of the packaging. The appliance should be kept upright as far as possible during transport. If the appli-
ance has to be taken off the pallet, it can be transported on its rollers. If this is not possible due to the lay of the ground, aids used must
support the appliance at the bottom right and left sides. It is important that the base plate be supported at both sides because of the ex-
tendable base plate, which is rather unstable and supports several components of the refrigeration circuit. If this is not possible, care-
fully tilt the appliance onto its back or side (hinge side) to transport it. At the installation site, remove the packaging and take the appli-
ance off the pallet. Procedure:
1
4
1
2
3
▸
Loosen the four fastening screws
1
securing the appliance to the pallet using a 17 mm (3/4
inch) open-end wrench and remove the fastening brackets
3
and
4
.
▸
To remove the front fastening bracket
3
, loosen the adjusting nut of the the back wheels
2
by a few turns using a 13 mm (1/2 inch) wrench. Do not use excessive force to prevent
damage to the adjustment system for levelling the feet.
▸
Working from the back of the appliance and using a hand-operated trolley appropriate to
the dimensions and weight of the appliance, remove the appliance from the pallet and
place carefully on the floor.
Extreme care should be taken so as not to damage the floor. Particularly delicate floors
should be protected beforehand with hardboard or plywood panels or other suitable materi-
als.
Electrical and water connection
The water filter (depending on model) in the appliance cannot guarantee the potability of water which is not intended for hu-
man consumption.
Connect the water connection to a drinking water supply only.
Do not use reducers or extensions! If the main water tap has to be turned off, then the
ice cube mode function (depending
on model) needs to be deactivated first using the touch display (see the operating instructions on how to do this).
View from above
= Electrical connection
= Water connection (depending
on model)
