Installation instructions
CombiCooler/Cooler/WineCooler/Freezer
V6000 Supreme, integrated
1091916-R01
07/05/2020
1091916-R01
15
Fitting the door panel
Fasten the brackets and mounting brackets to the door panel and then begin with the installation of the drawer (if applicable to
appliance).
▸
1)
Partially tighten the screws with the
nuts and washers. The nuts are located
between the underside of the drawer
and the bracket of the door panel.
▸
2)
Hook the door panel for the drawer
into the mounting devices, starting from
the bottom.
▸
3)
Align the door panel with the adjacent
cabinets using the brackets and mount-
ing brackets. By tightening or loosening
the screw in the bracket, move the door
panel up or down or, if the screws are
loosened slightly, to the right or left to
align it centrally with the rest of the kit-
chen cabinets.
▸
4)
Depth alignment: From the inside of
the drawer/door, lift up the seal. The top
hole is for adjusting the door panel
closer or further away and the bottom
hole fixes the drawer/door.
▸
5)
Hook the door panel into the mount-
ing devices, starting from the top align-
ing brackets.
▸
6)
The door panel can now be adjusted
to align with the adjacent cabinets using
the brackets and aligning brackets.
