V-ZUG AdoraDish V6000, Руководство по эксплуатации, Страница: 50 / 60

11 Trouble-shooting
Problem Possible cause Solution
An unpleasant
smell tends to
come from the ap-
pliance. ▪ There could be several
reasons for this. ▸ Clean the filter system (see page
46).
▸ Add dishwasher cleaner and run the
«Machine care» programme.
▸ Select a more powerful programme.
▸ Refill the salt reservoir with enough
regeneration salt (see page 46).
▸ Reduce the storage duration of the
tank , e.g. 12h (see page 41), in
the user settings.
The time display
freezes for up to 4
minutes at the be-
ginning of the pro-
gramme or during
the wash cycle. ▪ Water softener is being
flushed through after
the regeneration pro-
cess.
▪ The duration of the pro-
gramme and the time
display are being adjus-
ted to the degree of
soiling of the load.
▸ No action required.
The EcoManage-
ment consumption
values displayed
are too high. ▪ The values can vary ac-
cording to programme,
load, additional func-
tions and user settings.
▪ The accuracy of the val-
ues determined by the
appliance is subject to
typical technical disper-
sion.
▸ Check the user settings selected
and adjust them if necessary (see
page 41).
▸ Check the setting options selected
and adjust them if necessary (see
page 18).
11.3 Unsatisfactory washing results
Problem Solution
The dishes are not
clean. ▸ Select a more powerful programme.
▸ Load the baskets differently (see page 20), avoiding blind spots.
▸ Clean the filter system and re-insert correctly (see page 46).
▸ Check whether the spray arms are clogged or dirty (see page
45).
▸ Use the correct amount of detergent or use a different kind of
detergent (see page 28).
▸ Set to the right water hardness in the user settings (see page
41).
▸ Refill the salt reservoir with regeneration salt (see page 46).
50