V-ZUG AdoraDish V4000, Руководство по эксплуатации, Страница: 9 / 72

2 Using for the first time
The appliance must be installed and connected to the electricity supply by a quali-
fied fitter/electrician in accordance with the separate installation instructions.
2.1 Before using for the first time
Before operating the newly installed appliance for the first time, the following steps
should be taken:
▸ Switch on the power and turn on the water tap.
▸ Set the water hardness
in the user settings (see page 47).
▸ Fill the salt reservoir with approx. 1.0 l water before adding 1 kg standard regenera-
tion salt.
▸ Wipe away any excess salt around the edge of the salt reservoir.
▸ Fill the rinse agent reservoir with rinse agent.
▸ Run «Pre-rinsing»
without dishes to protect the appliance from corrosion from any
excess salt.
▸ Select (see page 34) and add (see page 35) the detergent.
▸ Run the «Intensive»
programme without dishes to remove traces of grease left be-
hind from the manufacturing process.
▸ Close the appliance door to start the programme.
The refill indicator can flash during the first few wash cycles. goes out when
the salt concentration in the reservoir is evenly distributed.
2.2 Setting the door weight
▸ Open the appliance door approx. 30°
and check that it stays in this position.
30˚
▸ If the appliance door opens further:
close the appliance door, tighten the
screws slightly and check the adjust-
ment again.
T25
9