V-ZUG AdoraDish V4000, Руководство по эксплуатации, Страница: 50 / 72

10 Demo mode
Hot water connection Selection
If the appliance has a hot water connection
and the setting is activated, optimum use is
made of the hot water available.
For the «No heating» setting: only enable if
the inlet water is 60° C. The dishes may not
be completely dry by the end of the pro-
gramme. Leave the dishes in the appliance
(e.g. overnight) to dry.
▪ : Activated
▪ : No heating
▪ : Deactivated (factory setting)
Deleting favourites Selection
Touch «Delete» and confirm the prompt to
delete all the favourites. ▪ : Deleting
Factory setting Selection
With «YES», all user settings are reset to the
factory settings. ▪ YES
▪ NO
Service settings
The service settings are only available for use
by service staff.
10 Demo mode
10.1 General information
The demo mode is a simulation programme where all programmes are carried out
without water or heating.
The appliance can be fully operated in the demo mode, but it will not wash.
Service settings may only be made by qualified personnel.
The demo mode can only be switched on or off when the appliance door is open.
When the demo mode is on, the following messages appear:
▸ When the appliance wakes up
START
Demo mode active
Deactivate in the service settings
▸ In the user guidance

50