8 Trouble-shooting
8.2
Other possible problems
Problem
Possible cause
Solution
The appliance will
not start.
▪
There could be several reas-
ons for this.
▸ Close the appliance door.
▸ Insert plug into mains socket.
▸ Check the fuse or circuit
breaker.
▸ See the «Operation with the
childproof lock activated»
section.
▪
«Demo mode» is turned on.
▸ Hold the and buttons
depressed and at the same
time press the button.
appears in the display.
▸ Press the
button.
In the display appears:
▸ Cancel the display by press-
ing the button.
An unpleasant
smell tends to
come from the ap-
pliance.
▪
There could be several reas-
ons for this.
▸ Clean the filter system.
▸ Add detergent and run the
programme.
▸ Select a more powerful pro-
gramme.
▸ Refill the salt reservoir with
enough regeneration salt.
8.3
Unsatisfactory washing results
Problem
Solution
The dishes are not
clean.
▸ Select a more powerful programme.
▸ Load the baskets differently, avoiding blind spots.
▸ Clean the filter system and re-insert correctly.
▸ Check to see whether the spray arms are clogged or dirty.
▸ Use the correct amount of detergent or use a different kind of
detergent.
▸ Check the water hardness setting.
▸ Refill the salt reservoir with regeneration salt.
There is a white
film on the dishes.
▸ Clean the appliance with dishwasher cleaner.
▸ Refill the salt reservoir with regeneration salt and run the
pro-
gramme without any dishes.
▸ Use the correct amount of detergent or use a different kind of
detergent.
▸ Refill the rinse agent.
▸ Increase the rinse agent dosage setting.
▸ Check the water hardness setting.
▸ If not using detergent, set to in the user settings.
29
