8 Trouble-shooting
7.5
Filling with rinse agent
Never fill the rinse agent reservoir with detergent! Wipe away any spilt rinse agent.
Risk of foaming. Follow the manufacturer’s safety instructions and warnings.
Rinse agent prevents water spotting after final rinsing (rinsing with rinse agent).
When the supply of rinse agent is exhausted, the
refill indicator flashes.
▸ Open the rinse agent reservoir by pushing the release catch
in the direction of the arrow.
▸ Fill with rinse agent up to the «max» mark
(1.3 dl = about 35 wash cycles).
▸ Close the cover.
▸ Wipe away any spilt rinse agent.
8
Trouble-shooting
You may be able to eliminate the following problems yourself. If not, write down the com-
plete error message and the serial number (FN) on the identification plate of your appli-
ance and call Customer Services.
8.1
Error messages
▪
In the event of a malfunction, an acoustic signal is emitted for 1 minute (depending on
the model).
Display
Possible cause
Solution
and alternate.
▪
High-foaming detergent
was used.
▪
Spilt rinse agent.
▪
Washing-up liquid was
used.
▸ Wipe away spilt rinse agent with a
cloth.
▸ Get rid of the foam with approxim-
ately 1 dl vinegar.
▸ Cancel the error message by press-
ing the button.
▸ Run the «Pre-rinsing» programme.
and alternate.
▪
Filter system is clogged
up.
▪
Drain hose is bent or
kinked.
▪
Drain pump or siphon is
blocked.
▪
Excessive foaming due
to rinse agent spillage.
▸ Clean the filter system.
▸ Fix the problem.
▸ Cancel the error message by press-
ing the button.
▸ Restart the programme.
27
