6 User settings
6.3
Acoustic signal
Only present on fully and design-integrated appliances.
Display on operating panel:
Factory setting:
Possible settings:
The acoustic signal can be turned off
or on. In the event of a malfunction, an
acoustic signal is emitted even in the
off mode.
▪
Off
▪
Low
▪
High
6.4
All in 1
Display on operating panel:
Factory setting:
Possible settings:
The programmes must be adapted for
use with detergent with integrated salt
and rinse agent function. The duration
of very short programmes is extended
because such detergent takes longer
to dissolve.
▪
Off
▪
On
products are not suitable for all degrees of water hardness. Follow the detergent
manufacturer’s instructions. When the or
refill indicators flash, continue to re-
fill with regeneration salt or rinse agent.
6.5
Water hardness
Display on panel:
Factory setting:
Possible settings:
The water hardness setting can be
changed to suit local conditions. Con-
tact your local water authority for the
relevant information.
▪
Off
▪
– Level 1–9
Water hardness levels
Level
0
1
2
3
4
5
6
7
8
9
°fH
0–5
6–10 11–15 16–20 21–25 26–30 31–40 41–50 51–70 71–120
°dH
0–3
4–6
7–9
10–12 13–14 15–16 17–22 23–27 28–38
39–65
6.6
Rinse agent dosage
Display on operating panel:
Factory setting
Possible settings:
If the drying result is unsatisfactory, the
dosage can be either turned off or set
to one of 9 levels.
▪
Off
▪
– Level 1–9
23
